Product Reviews

Silkland DP80 DisplayPort Cable Review

A short, high-bandwidth DisplayPort cable for gamers and desktop setups that need a tidy connection between nearby compatible devices.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Silkland DP80 DisplayPort Cable review centers on a compact 1.6-foot cable built for high-refresh gaming displays and compatible DisplayPort equipment.

Its 80Gbps rating and VESA certification make it a candidate for newer setups, provided both the graphics card and monitor support the modes you want to use.

Silkland DP80 Review Summary

The quick verdict

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short, high-bandwidth DisplayPort cable for gamers and desktop setups that need a tidy connection between nearby compatible devices.

  • VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes extend up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
  • Includes support for VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
  • Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed 7.1, 5.1, and 2.0 audio pass-through.

Pros

  • VESA certification and UHBR20 support make it relevant to high-bandwidth DP 2.1 systems.
  • The listed resolution and refresh-rate combinations cover demanding gaming display configurations.

Consider before buying

  • At 1.6 feet, it may be too short for setups that need to route behind a desk or reach ports farther apart.
  • The highest listed modes and features depend on support from the connected graphics card and monitor; the cable alone does not establish that a setup can use them.
Read the full review summary

The DP80 combines a short run with support for DisplayPort 2.1 UHBR20, up to 80Gbps, and a broad list of high-resolution and high-refresh modes.

It is designed for direct DisplayPort connections between a computer and monitor, with backward compatibility for DP 2.0 and DP 1.4.

Features such as VRR, DSC, and MST may suit gaming and multi-monitor configurations when the rest of the setup also supports them.

The 1.6-foot length is the key practical constraint: it can keep a nearby desktop connection neat, but gives little room to route around furniture or distant ports.

Consider this cable if your devices sit close together and you want a VESA-certified DP 2.1 connection; check your monitor, GPU, resolution, refresh rate, and routing distance before buying.

The buying factors

Silkland DP80 Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Bandwidth support

The 80Gbps DP 2.1 UHBR20 specification is suited to demanding compatible display setups.

9/10

High-refresh flexibility

The listed modes include uncompressed 4K at 240Hz and 2K at 540Hz, with higher options up to 16K at 60Hz when DSC is enabled.

8/10

Gaming features

VRR, ALLM, FEC, and DSC 1.2a target gaming systems whose display and graphics hardware support those features.

8/10

Build details

Triple shielding, tinned copper conductors, gold-plated connectors, and a nylon exterior are practical construction choices.

5/10

Setup flexibility

The short 1.6-foot run works best when the two DisplayPort devices are very close together.

8/10

Compatibility range

It supports DP 2.0 and DP 1.4 devices, though achievable performance depends on both connected devices.

Key Features and Specifications of Silkland DP80

  • VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes extend up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
  • Includes support for VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
  • Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed 7.1, 5.1, and 2.0 audio pass-through.
  • Male-to-male DisplayPort connectors, 28AWG tinned copper conductors, triple shielding, 24K gold-plated connectors, and a nylon exterior.
  • Measures 1.6 feet and is intended for indoor connections between DisplayPort-equipped computers and monitors.

Pros and Cons of Silkland DP80

Pros

  • VESA certification and UHBR20 support make it relevant to high-bandwidth DP 2.1 systems.
  • The listed resolution and refresh-rate combinations cover demanding gaming display configurations.
  • Gaming-oriented features include VRR, ALLM, FEC, DSC 1.2a, and MST.
  • Short length can help limit excess cable around a nearby PC and monitor.
  • The product includes 24-month service and technical support.

Consider before buying

  • At 1.6 feet, it may be too short for setups that need to route behind a desk or reach ports farther apart.
  • The highest listed modes and features depend on support from the connected graphics card and monitor; the cable alone does not establish that a setup can use them.
  • This is a DisplayPort-to-DisplayPort cable, so it is intended for devices with matching DP ports.

Who Should Buy Silkland DP80?

Good fit

Choose the Silkland DP80 if your computer and monitor are close together and both have DisplayPort ports.

Its 80Gbps DP 2.1 specification, VESA certification, and listed UHBR20 support make it a sensible match for a system being assembled around high refresh rates or high resolutions.

Before ordering, verify the exact display mode your GPU and monitor support, including whether it requires DSC. Also measure the port-to-port route; 1.6 feet leaves little slack for routing around a desk, stand, or other equipment.

For a gaming setup, its VRR, ALLM, FEC, and MST support add useful compatibility considerations, but they rely on the rest of the system. Match the connection standard across devices and confirm your intended configuration in their specifications.

Who should skip it

Skip this short cable if your PC and display are separated by more than a nearby desk connection or you need extra slack for cable management.

Consider another connection type or cable arrangement if either device lacks a DisplayPort port. Also avoid buying solely for a headline resolution or refresh rate without confirming that both connected devices support that mode.

What the Silkland DP80 means for a gaming setup

Bandwidth and display modes

The DP80's 80Gbps UHBR20 designation is its central specification. The product lists uncompressed support through 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz, alongside higher resolutions and refresh rates when DSC is enabled.

These are compatibility targets, so check the source and display requirements for the particular mode you plan to use.

Gaming and multi-monitor use

VRR, ALLM, FEC, and DSC 1.2a are relevant to a gaming connection, while MST can support multi-monitor arrangements.

Their presence on the cable does not determine system behavior by itself: the graphics card, monitor, settings, and connection layout all matter. If you plan multiple screens, confirm the devices and intended setup support the required DisplayPort features.

Construction and handling

The cable uses 28AWG tinned copper conductors and triple shielding, with a nylon outer covering and gold-plated connectors.

The connector design has no latch, which may make unplugging simpler; ensure the plug is fully seated and route the cable so it is not pulled under tension.

Length and compatibility check

At 1.6 feet, this cable fits best when the graphics card and monitor are close, such as adjacent ports in a desktop setup.

It is backward compatible with DP 2.0 and DP 1.4, but the available resolution, refresh rate, and features will depend on the connected equipment. Measure the path and check both devices before choosing it.

Alternatives to Silkland DP80

Only one supplied alternative offers a useful difference in length and bandwidth for this setup.

Computer DisplayPort Cables alternative

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft
4.6/5

7,000+ ratings

Read Amazon Reviews

Silkland 54Gbps DisplayPort 2.1 Cable, 10 ft

Choose the 10-foot cable when your ports are farther apart and its 54Gbps specification suits the display mode you need.

Prefer the DP80 for a close connection where its higher bandwidth specification better matches the rest of the system.

  • This Silkland cable is 10 feet long and supports 54Gbps, with listed modes including 4K at 240Hz and 8K at 120Hz; it is backward compatible with a wider set of DisplayPort versions, from 2.0 through 1.0.
  • The DP80 offers up to 80Gbps bandwidth and measures 1.6 feet, making it the more compact choice for nearby devices.

Is Silkland DP80 Worth It?

The Silkland DP80 is worth considering for a nearby PC-to-monitor connection that needs DisplayPort 2.1 bandwidth and has compatible equipment.

Its VESA certification, 80Gbps rating, and gaming feature support make it a capable fit on paper for demanding display modes.

Its short 1.6-foot length is the main buying constraint. Confirm the route between ports and the GPU and monitor's support for your chosen resolution, refresh rate, and DSC requirements before choosing it.

Your review at a glance

Silkland DP80 DisplayPort Cable
4.7/5

2,000+ ratings

Read Amazon Reviews

Silkland DP80 DisplayPort Cable

A short, high-bandwidth DisplayPort cable for gamers and desktop setups that need a tidy connection between nearby compatible devices.

  • VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes extend up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
  • Includes support for VRR, FEC, ALLM, DSC 1.2a, MST, Dynamic HDR10+, 3D, and HDCP 2.3.
  • Backward compatible with DisplayPort 2.0 and 1.4, and supports uncompressed 7.1, 5.1, and 2.0 audio pass-through.

Written by

elgaleon.org Editorial Team

Editorial team

elgaleon.org publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Silkland DP80 DisplayPort Cable

Silkland DP80 DisplayPort Cable

A short, high-bandwidth DisplayPort cable for gamers and desktop setups that need a tidy connection between nearby compatible devices.

  • VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth and UHBR20 support.
  • Supports uncompressed 4K at 240Hz, 8K at 60Hz, and 2K at 540Hz; with DSC enabled, listed modes extend up to 16K at 60Hz, 8K at 240Hz, and 4K at 540Hz.
Check Video Reviews on Amazon